In your project
Begin with the complete workflow.
Define what the code contains, which system validates it and how the equipment should respond. These choices guide the reader interface and application integration.
QR Readers & Terminals
FC8130
QR reader
A reading point for connected equipment.
A QR reader for access and self-service projects. Evaluate the device with your actual codes and host system before moving from a sample to deployment.
- QR reader
- Host integration
Product resources
Manuals & drawings.
Documents for FC8130 →Need the FC8130 manual, specification or installation drawing? We’ll help you find the document for your configuration.
Request documentsA few things worth knowing.
What should I check if serial output is missing or unreadable?
Match the baud rate, data format and electrical interface on both sides, then inspect the cable and any serial-to-USB adapter. Also confirm whether the reader is sending raw content or a framed protocol message before treating additional bytes as corrupted data.
Why can output differ from the original QR content?
A reader in transparent output mode may send the original content, while a protocol or development mode can add a header, length, device information and check data. Select the mode that matches the host application and use the protocol reference for that model and firmware.
Can repeated scans of the same code behave differently?
Yes. Single-read and interval modes can treat repeated presentation of the same code differently, while a different code may still be accepted immediately. Confirm which modes and repeat intervals are available for the selected reader before defining the user flow.
Your next step
Let’s put FC8130
in your project.
Tell us where it will be used, how it should connect and the quantity you need.
Continue exploring
