Resources / Feocey Open API
Connect with Feocey.
Find the integration reference that matches your device and software configuration.
Resources for your device
FC-SFGZK
Painted swing gate
Match the access decision to the gate.
A reader captures the credential, the access system decides whether passage is allowed, and the gate controller operates the barrier. Confirm the reader output, controller input, protocol, power and signal timing for FC-SFGZK.
Identify the gate controller
Provide the gate model, controller version and the actual terminal definitions. Match voltage, contact behaviour and any serial protocol to the supplied wiring reference.
Define the passage sequence
Describe accepted and rejected credentials, reset timing, direction, sensor response and the required emergency behaviour.
Commission the complete entrance
Use the approved layout and wiring drawings to test the reader, controller and gate together before normal operation.
Documents for FC-SFGZK.
No documents for FC-SFGZK are available to download here yet. Ask for the manual, drawing or integration reference that matches your configuration.
Request documents for FC-SFGZK ↗Common questions for FC-SFGZK.
How do we choose a gate structure?
Start with the passage workflow, available space and users. Swing gates use swinging barrier leaves; flap gates retract their barriers; tripod turnstiles use a three-arm mechanism; full-height turnstiles use a rotating barrier; AB gates coordinate two sequential stages. Review the lane layout, supervision, accessible route and emergency behaviour with the project team.
Does a single-mechanism cabinet mean a complete single lane?
For compatible swing and flap systems, a single-mechanism cabinet controls one side of a lane. Two matching outer cabinets form one lane; adding a compatible double-mechanism cabinet between them can form two lanes. Single and double mechanisms describe cabinet configurations, not complete lane quantities. Tripod, full-height and AB gates use their own arrangements. Confirm the final quantities and footprint on the project drawing.
Is cabinet size the same as clear passage width?
No. Cabinet size, clear passage width and the complete installed footprint describe different measurements. Confirm the cabinet arrangement, arm or barrier movement, accessible route, fixing pattern and service clearance using the approved project drawing.
Are the pictured readers and face terminals included?
The pictures illustrate possible access configurations. Confirm the gate, readers, terminals, controllers, software and quantities in the order. Match the credential output, gate input, control protocol and power arrangement before integration.
What should we provide to request a gate layout?
Send the entrance width, planned lanes, expected passage workflow, reader or controller, floor construction, power and cable route. Include the accessible route and required emergency behaviour. Ask for the model-specific installation and wiring references before preparing the site.